Plasma Torch Consumables – UNIMIG

SC80 Plasma Torch Circle Cutting Attachment

hello@beechandco.com.au — Mon, 29 Mar 2021 21:31:10 +0000

The UNIMIG SC80 plasma circle cutting guide allows you to cut circles up to 75cm in diameter accurately and with ease. The complete kit is designed for quick and easy setup.

The post SC80 Plasma Torch Circle Cutting Attachment appeared first on UNIMIG.

SC80 Plasma Torch Consumable Starter Kit

hello@beechandco.com.au — Mon, 04 May 2020 06:20:18 +0000

Packaged in a sturdy carry case, the SC80 Plasma Torch Consumable Starter kit is the perfect companion to be bundled alongside machines, with the kit containing all the essential consumables.

CONTENTS:

1 x Swirl Ring (SC8006)
1 x Retaining Cap (SC8030)
5 x Electrodes (PSC8004)
5 x 1.3mm Cutting Tips (PSC8020-13)
5 x 1.0mm Cutting Tips (PSC8020-10)
1 x Stand Off Guide (SC8040)
1 x Cutting Buggy (SC8051)

The post SC80 Plasma Torch Consumable Starter Kit appeared first on UNIMIG.

SC30 Plasma Torch Consumable Starter Kit

hello@beechandco.com.au — Mon, 04 May 2020 06:17:05 +0000

Packaged in a sturdy carry case, the SC30 Plasma Torch Consumable Starter kit is the perfect companion to be bundled alongside machines, with the kit containing all the essential consumables.

CONTENTS:

1 x Swirl Ring (SC2506)
1 x Retaining Cap (SC2530)
5 x Electrodes (PSC2504)
5 x 0.9mm Cutting Tips (PSC2520-09)
1 x Stand Off Guide (SC2540)
1 x Cutting Buggy (SC2551)

The post SC30 Plasma Torch Consumable Starter Kit appeared first on UNIMIG.

SC80 Plasma Torch Cutting Buggy

hello@beechandco.com.au — Thu, 12 Dec 2019 02:52:17 +0000

The UNIMIG SC80 Cutting Buggy has been designed for you to be able to maneuver the torch with ease, whilst keeping the tip off of the workpiece at a levelled height.

The post SC80 Plasma Torch Cutting Buggy appeared first on UNIMIG.

SC80 Plasma Torch Standoff Guide

hello@beechandco.com.au — Thu, 12 Dec 2019 02:50:09 +0000

UNIMIG SC80 Standoff Guides keep distance between your plasma torch and the workpiece, extending consumable life.

The post SC80 Plasma Torch Standoff Guide appeared first on UNIMIG.

SC80 Plasma Torch Shield Cap

hello@beechandco.com.au — Thu, 12 Dec 2019 02:46:27 +0000

The UNIMIG shield cap has been designed to attach on the other end of the shield cap body to prolong the life of the consumables, whilst also having a greater opening to remove more material.

The post SC80 Plasma Torch Shield Cap appeared first on UNIMIG.

SC80 Plasma Torch Gouging Shield Cap

hello@beechandco.com.au — Thu, 12 Dec 2019 02:40:34 +0000

The UNIMIG gouging shield cap has been designed to attach on the other end of the retaining cap to prolong the life of the consumables, whilst also having a greater opening to remove more material.

The post SC80 Plasma Torch Gouging Shield Cap appeared first on UNIMIG.

SC80 Plasma Torch Retaining Cap

hello@beechandco.com.au — Thu, 12 Dec 2019 02:38:02 +0000

The UNIMIG Retaining Cap is designed to hold all the consumables onto the torch head, used for standoff cutting.

The post SC80 Plasma Torch Retaining Cap appeared first on UNIMIG.

SC80 Plasma Torch Shield Cap Body

hello@beechandco.com.au — Thu, 12 Dec 2019 02:27:00 +0000

The UNIMIG Shield Cap Body is designed to hold all the consumables onto the torch head, used for either Gouging or Contact Cutting.

The post SC80 Plasma Torch Shield Cap Body appeared first on UNIMIG.

SC80 Plasma Torch Standoff Cutting Tip

hello@beechandco.com.au — Thu, 12 Dec 2019 02:07:27 +0000

Unimig SC80 Standoff Cutting tips have been designed with high shock-resistant materials to withstand high heat for extended consumable life.

Packet QTY: 5

The post SC80 Plasma Torch Standoff Cutting Tip appeared first on UNIMIG.

SC80 Plasma Torch Contact Cutting Tips

hello@beechandco.com.au — Thu, 12 Dec 2019 02:02:31 +0000

Unimig SC80 Contact Cutting tips have been designed with high shock-resistant materials to withstand high heat for extended consumable life.

Packet QTY: 5

The post SC80 Plasma Torch Contact Cutting Tips appeared first on UNIMIG.

SC80 Plasma Torch 1.6mm Gouging Tips

hello@beechandco.com.au — Thu, 12 Dec 2019 01:40:24 +0000

UNIMIG SC80 gouging tips are designed to effectively remove defects on your workpiece. These tips are built with quality materials to produce maximum performance when you need it most.

Effectively Removes Defects
High consumable Life
Delivers High Performance

The post SC80 Plasma Torch 1.6mm Gouging Tips appeared first on UNIMIG.

SC80 Plasma Torch Swirl Ring

hello@beechandco.com.au — Thu, 12 Dec 2019 01:38:30 +0000

UNIMIG SC80 Swirl Rings have been designed to control and swirl the compressed air around the electrode and into the nozzle. It plays a crucial part in ensuring longer consumable life and clean-cut quality.

Made from Vespel
Extends consumable life
Used for clean-cut quality

The post SC80 Plasma Torch Swirl Ring appeared first on UNIMIG.

SC80 Plasma Torch Electrodes

hello@beechandco.com.au — Thu, 12 Dec 2019 01:35:42 +0000

UNIMIG Plasma Torch electrodes have been designed to give optimum power to provide a stable and effective arc.

Packet QTY: 5

The post SC80 Plasma Torch Electrodes appeared first on UNIMIG.

SC30 Plasma Torch Circle Cutting Attachment

hello@beechandco.com.au — Thu, 12 Dec 2019 01:30:36 +0000

The UNIMIG SC30 plasma circle cutting guide allows you to cut circles up to 75cm in diameter accurately and with ease. The complete kit is designed for quick and easy setup.

The post SC30 Plasma Torch Circle Cutting Attachment appeared first on UNIMIG.

SC30 Plasma Torch Cutting Buggy

hello@beechandco.com.au — Thu, 12 Dec 2019 01:27:40 +0000

The UNIMIG SC30 Cutting Buggy has been designed for you to be able to maneuver the torch with ease, whilst keeping the tip off of the workpiece at a levelled height.

The post SC30 Plasma Torch Cutting Buggy appeared first on UNIMIG.

SC30 Plasma Torch Standoff Guide

hello@beechandco.com.au — Thu, 12 Dec 2019 01:23:46 +0000

UNIMIG Standoff Guides keep distance between your plasma torch and the workpiece, extending consumable life.

The post SC30 Plasma Torch Standoff Guide appeared first on UNIMIG.

SC30 Plasma Torch Retaining Cap

hello@beechandco.com.au — Thu, 12 Dec 2019 00:46:37 +0000

UNIMIG SC30 Retaining cap designed to hold all the consumables onto the torch head.

The post SC30 Plasma Torch Retaining Cap appeared first on UNIMIG.

SC30 Plasma Torch 0.9mm Cutting Tips

hello@beechandco.com.au — Thu, 12 Dec 2019 00:44:06 +0000

UNIMIG SC30 Cutting tips have been designed with high shock-resistant materials to withstand high heat for extended consumable life.

Packet QTY: 5

The post SC30 Plasma Torch 0.9mm Cutting Tips appeared first on UNIMIG.

SC30 Plasma Torch Swirl Ring

hello@beechandco.com.au — Thu, 12 Dec 2019 00:40:27 +0000

UNIMIG SC30 Swirl Rings have been designed to control and swirl the compressed air around the electrode and into the nozzle. It plays a crucial part in ensuring longer consumable life and clean-cut quality.

Made from Vespel
Extends consumable life
Used for clean-cut quality

The post SC30 Plasma Torch Swirl Ring appeared first on UNIMIG.

SC30 Plasma Torch Electrodes

hello@beechandco.com.au — Thu, 12 Dec 2019 00:39:45 +0000

UNIMIG Plasma Torch electrodes have been designed to give optimum power to provide a stable and effective arc.

Packet QTY: 5

The post SC30 Plasma Torch Electrodes appeared first on UNIMIG.

SC80 Plasma Torch Cooling Tube

hello@beechandco.com.au — Thu, 12 Dec 2019 00:29:30 +0000

The UNIMIG cooling tube is designed to push cold air to cool down the front end consumables on your torch, it means you are able to plasma cut for longer by stopping the torch head from overheating.

Cools Efficiently
Extends Cutting Time
Extends Consumable life

The post SC80 Plasma Torch Cooling Tube appeared first on UNIMIG.