Protective Apparel – UNIMIG

Rogue Welding Sleeves Model 303

hello@beechandco.com.au — Tue, 20 Aug 2024 05:27:51 +0000

The Rogue Welding Sleeves slip on easily to provide full arm coverage against welding spatter and additional heat resistance. These sleeves meet the ISO 11611:2015 safety standards.

Split cowhide leather across the high-wear areas provides a Class 2 level of protection while reducing the weight from traditional split leather by over 25%
Fire retardant cotton increases the comfort while still providing a Class 1 protection level, and kevlar stitching reinforces the sleeves
Elastic cuffs protect against sparks and molten metal and hold the sleeves in place

Standards:

ISO 11611:2015

The post Rogue Welding Sleeves Model 303 appeared first on UNIMIG.

Rogue Long TIG Gloves Model 104

hello@beechandco.com.au — Tue, 20 Aug 2024 05:03:57 +0000

Maintain complete control over your TIG welds with the Rogue Long TIG Gloves. These gloves meet the EN 388 and EN 407 safety standards.

Unlined for maximum feedback, these gloves have a 5/5 dexterity score
The reinforced heat-guard side patch helps with reducing hand fatigue
Made from premium grain goat leather on the hands and split leather on the cuffs

Standards:

EN 388
EN 407
AS/NZS 2161.2:2020
AS/NZS 2161.3:2020
AS/NZS 2161.4:1999

The post Rogue Long TIG Gloves Model 104 appeared first on UNIMIG.

Rogue TIG Gloves Model 103

hello@beechandco.com.au — Tue, 20 Aug 2024 05:00:46 +0000

Maintain complete control over your TIG welds with the Rogue TIG Gloves. These gloves meet the EN 388 and EN 407 safety standards.

Unlined for maximum feedback, these gloves have a 5/5 dexterity score
The reinforced heat-guard side patch helps with reducing hand fatigue
Made from premium grain goat leather

Standards:

EN 388
EN 407
AS/NZS 2161.2:2020
AS/NZS 2161.3:2020
AS/NZS 2161.4:1999

The post Rogue TIG Gloves Model 103 appeared first on UNIMIG.

Rogue General Purpose Welding Gloves Model 102

hello@beechandco.com.au — Tue, 20 Aug 2024 04:59:07 +0000

The Rogue General Purpose Welding Gloves have been designed for light-to-medium duty welding and plasma cutting for a solid grip and better control. These gloves meet the EN 388 and EN 407 safety standards.

Made from premium grain goat leather on the palms and split leather on the back and cuffs
Fleece lined inside for comfort
Bolstered wrist pads

Standards:

EN 388
EN 407
AS/NZS 2161.2:2020
AS/NZS 2161.3:2020
AS/NZS 2161.4:1999

The post Rogue General Purpose Welding Gloves Model 102 appeared first on UNIMIG.

Rogue Heavy Duty Welding Gloves Model 101

hello@beechandco.com.au — Tue, 20 Aug 2024 04:39:24 +0000

The Rogue Heavy Duty Welding Gloves are built for high heat and intensity MIG welding and plasma cutting. These gloves meet the EN 388 and EN 407 safety standards.

Heavy-duty internal fleece lining
Reinforced double layered palm and thumb
Durable split cowhide leather

Standards:

EN 388
EN 407
AS/NZS 2161.2:2020
AS/NZS 2161.3:2020
AS/NZS 2161.4:1999

The post Rogue Heavy Duty Welding Gloves Model 101 appeared first on UNIMIG.

Rogue Welding Hood Model 304

hello@beechandco.com.au — Thu, 14 May 2020 05:13:07 +0000

The Rogue Welding Hood is designed to provide maximum protection for your head, neck, shoulders, and chest while remaining lightweight and breathable. It meets the ISO 11611:2015 safety standards.

Fire retardant cotton provides a Class 1 protection level while still remaining comfortable, reinforced with high tensile strength and heat-resistant kevlar stitching
An internal mesh liner provides a cooler experience while welding
Designed to be worn over a welding jacket, the adjustable velcro strap defends against sparks and molten metal

Standards:

ISO 11611:2015

The post Rogue Welding Hood Model 304 appeared first on UNIMIG.

Elipse® P3 Nuisance Odour Replacement Filters

hello@beechandco.com.au — Tue, 03 Dec 2019 02:28:11 +0000

Replacement filters for the Elipse® Half-Mask P2 Respirator.

P3 >99,95% for 0,3 μ particulate. Mechanical type multi-layer HESPA Synthetic media with TPE flexible overmolded / encapsulated. Glued additional carbon activated impregnated media.

The post Elipse® P3 Nuisance Odour Replacement Filters appeared first on UNIMIG.

ROGUE™ Leather Welding Chaps

hello@beechandco.com.au — Mon, 04 Nov 2019 04:29:50 +0000

The ROGUE Welding Chaps are made from tough, durable and pliable split cowhide leather that is heat and flame resistant. The leather chaps provide excellent lower body and leg protection from heat, sparks and abrasion and are easily secured with adjustable straps, making for a comfortable fit.

Made from tough, durable cowhide leather
Heat and flame resistant
Adjustable straps

The post ROGUE™ Leather Welding Chaps appeared first on UNIMIG.

Rogue Full Leather Welding Jacket Model 203

hello@beechandco.com.au — Mon, 04 Nov 2019 04:27:41 +0000

The Rogue Full Leather Welding Jacket is durable and designed for heavy-duty welding applications, even in hot conditions. It meets the ISO 11611:2015 safety standards.

-High-quality pigskin grain leather provides a Class 2 level of protection while reducing the weight from traditional split leather by over 25%
An internal mesh liner provides a cooler experience while welding
The adjustable neck, concealed fasteners and elastic cuffs protect against sparks, molten metal and electrostatic discharge

Standards:

ISO 11611:2015

The post Rogue Full Leather Welding Jacket Model 203 appeared first on UNIMIG.

Elipse® Half-Mask P2 Respirator

hello@beechandco.com.au — Mon, 04 Nov 2019 02:54:01 +0000

The Elipse® Half-Mask P2 Respirator combines a particulate filter with an activated carbon cloth to provide a minimum 99.95% filtration against odours, dust, all types of fumes, oil and water mists and micro-organisms. It is designed to fit under most welding helmets and welding masks.

Approved to AS/NZS 1716:2012 as a P2 Reusable Respirator, as the P3 filters are fitted on Half Mask.
Latex and silicone-free, lightweight TPE face piece that is comfortable to wear for long periods of time.
Low profile filters provide an unobstructed field of vision.
Compatible with other PPE safety products including visors and welding helmets.

The post Elipse® Half-Mask P2 Respirator appeared first on UNIMIG.

Rogue Welding Apron Model 301

hello@beechandco.com.au — Fri, 23 Aug 2019 04:08:24 +0000

The Rogue Welding Apron is a durable alternative to the Rogue Welding Jacket for gas cutting, heating and light gauge welding. This apron meets the ISO 11611:2015 safety standards.

High-quality pigskin grain leather provides a Class 2 level of protection while reducing the weight from traditional split leather by over 25%
High tensile strength, heavy-duty fire retardant treated cotton webbed straps and kevlar stitching reinforce the apron
Secure and release the apron with a single buckle, with multiple adjustment points for a tailored fit

Standards:

ISO 11611:2015

The post Rogue Welding Apron Model 301 appeared first on UNIMIG.

Rogue Leather Sleeved Welding Jacket Model 202

hello@beechandco.com.au — Fri, 23 Aug 2019 04:06:22 +0000

The Rogue Leather Sleeved Welding Jacket is lightweight and breathable, ideal for light to heavy-duty welding applications even in hot conditions. This jacket meets the ISO 11611:2015 safety standards.

Fire retardant cotton provides a Class 1 protection level while still remaining comfortable
High-quality pigskin grain leather sleeves provide a Class 2 level of protection while reducing the weight from traditional split leather by over 25%
The adjustable neck, concealed fasteners and elastic cuffs protect against sparks, molten metal and electrostatic discharge

Standards:

ISO 11611:2015

The post Rogue Leather Sleeved Welding Jacket Model 202 appeared first on UNIMIG.

Rogue Welding Jacket Model 201

hello@beechandco.com.au — Fri, 23 Aug 2019 04:02:51 +0000

The Rogue Welding Jacket is lightweight and breathable, ideal for light-duty welding applications even in hot conditions. This jacket meets the ISO 11611:2015 safety standards.

Fire retardant cotton provides a Class 1 protection level while still remaining comfortable
Reinforced with high tensile strength and heat-resistant kevlar stitching
The adjustable neck and cuffs, and concealed fasteners, protect against sparks, molten metal and electrostatic discharge

Standards:

ISO 11611:2015

The post Rogue Welding Jacket Model 201 appeared first on UNIMIG.

Rogue Welding Bandana Model 305

hello@beechandco.com.au — Fri, 23 Aug 2019 03:29:59 +0000

The Rogue Welding Bandana is worn under your welding helmet, working to absorb sweat and protect you from sparks and spatter. It meets the ISO 11611:2015 safety standards.

Fire retardant cotton provides a Class 1 protection level while still remaining comfortable, reinforced with high tensile strength and heat-resistant kevlar stitching
An internal mesh liner provides a cooler experience while welding
The three-piece closure strap ensures a tailored fit to defend against sparks and molten metal

Standards:

ISO 11611:2015

The post Rogue Welding Bandana Model 305 appeared first on UNIMIG.