Fume Extractions – UNIMIG

KSZ-3.0D Fume Extractor

hello@beechandco.com.au — Wed, 21 Aug 2019 19:21:52 +0000

The KSZ-3.0D Fume Extractor is a mobile dual-arm 415-volt fume extraction unit capable of filtering an area of up to 20 square metres. The unit is fitted with a programmable logic controller (PLC) allowing customisation of specific operations of time/duration of operation. The PLC, combined with a pressure differentiation switch, displays a red warning light indicating when the filter must be cleaned or replaced. The unit is constructed from high quality sheet metal and is easily manoeuvrable thanks to its four heavy duty lockable caster wheels.

The machine is suited for the purification of fumes and dust generated by welding and grinding. The suction arm rotates 360 degrees by pulling the handle on the hood to the desired work area. The machine is also self-cleaning with automatic reverse blowing.

Our filters have been independently tested to ISO:EN779:2012 and can remove greater than 99.8% of nanoparticles (PM1 particulate matter), high enough filtration to meet indoor emission standards.

Customisable programs
Filters area up to 20 square metres
Portable
Removes 99.8% nanoparticles (PM1 particulate matter)

The post KSZ-3.0D Fume Extractor appeared first on UNIMIG.

KSZ-1.5S Fume Extractor

hello@beechandco.com.au — Wed, 21 Aug 2019 19:18:43 +0000

The KSZ-1.5S Fume Extractor is a mobile single-arm 415-volt fume extraction unit capable of filtering an area of up to 10 square metres. The unit is fitted with a Programmable Logic Controller (PLC) allowing customisation of specific operations of time / duration. The PLC, combined with a pressure differentiation switch, displays a red warning light indicating when the filter must be cleaned or replaced. The unit is constructed from high quality sheet metal and is easily manoeuvrable thanks to its four heavy duty lockable caster wheels.

This machine is suited for the purification of fumes and dust generated by welding and grinding. The suction arm rotates 360 degrees by pulling the handle on the hood to the desired work area.

Our filters have been independently tested to ISO:EN779:2012 and can remove greater than 99.8% of nanoparticles (PM1 particulate matter), high enough filtration to meet indoor emission standards. The filtered air is discharged through the air vents at the bottom of the fume extractor.

This machine is self-cleaning with an automatic reverse blowing function.

Customisable programs
Filters area up to 10 square metres
Portable
Removes 99.8% nanoparticles (PM1 particulate matter)

The post KSZ-1.5S Fume Extractor appeared first on UNIMIG.

KSJ-0.7S Fume Extractor

hello@beechandco.com.au — Wed, 21 Aug 2019 18:59:36 +0000

The KSJ-0.7S Fume Extractor is an economical, compact, and mobile single-arm 10 AMP fume extraction unit capable of filtering an area of up to eight square metres. The unit is constructed from high quality sheet metal and is easily manoeuvrable thanks to its four heavy duty lockable caster wheels. The machine is suited for the purification of fumes and dust generated by welding and grinding. The suction arm rotates 360 degrees by pulling the handle on the hood to the desired work area.

Our filters have been independently tested to ISO:EN779:2012 and can remove greater than 99.8% of nanoparticles (PM1 particulate matter), high enough filtration to meet indoor emission standards. It also features a compressed air inlet valve, as well as a removable dust drawer for cleaning of the filter to prolong filter life.

10 AMP plug
Filters area up to eight square metres
Portable
Removes 99.8% nanoparticles (PM1 particulate matter)

The post KSJ-0.7S Fume Extractor appeared first on UNIMIG.